 |
BATTERY CHARGERS
TOOLS
|
P# MXP151553 MXP:$62.00 BikeMaster® 17-PIECE TOOL KIT • Designed specifically for metric vehicles • Open ended wrenches: 11, 12, 13, 14, 16 and 17mm sizes • 10mm combination wrench • 6” adjustable wrench •3/8” drive ratchet wrench •Locking pliers •Pen type tire gauge •5 cable ties •Electrical wire •Mechanic’s safety wire • 10 piece metric hex key set (1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8 and 10mm sizes) • Flashlight • 6-in-1 screwdriver • 21mm spark plug socket • 18 mm spark plug socket • Spark plug gap gauge • Electrical tape • Tool bag |
P# MXP154027 MXP:$55.00 CruzTOOLS® EconoKIT® M1 • Major upgrade over O.E.M. kits at a very reasonable price • Includes 4 combination wrenches, 8” adjustable wrench, locking pliers and more |
P# MXP154011 MXP:$37.95 CruzTOOLS® ECONO KIT®
M2 • Major upgrade in quality
and content over O.E.M. kits • Contains
the exclusive Power Drive combination wrenches, plus
a host of other essentials |
P# MXP154013 MXP:$22.00 OUTBACK’R™ M14 • 4 hex heads (3, 4, 5 and 6mm) • 2 screw drivers • Socket driver with 8, 10 and 12mm sockets • 13 and 14mm open end wrenches • 3 spoke wrenches
|
P# MXP151527 MXP:$11.00 32-BLADE DUAL READING COMBINATION FEELER GAUGE SET • Dual marked 0.03mm/0.001” to 1mm/0.040” •95mm long taper blades, hardened and polished.
|
P# MXP151525 MXP:$7.25 12-BLADE COMBINATION TAPPET FEELER GAUGE SET • Blades: dual marked 0.203mm/0.008” to 0.660mm/0.026” •95mm long taper blades, hardened and polished. Manufacturer’s |
|||||
|
151649 MXP:$69.95 VALVE SPRING COMPRESSOR • Fully adjustable for just about any head and valve height • Fully closed 2-3/4” (7 cm) to fully open 9” (23 cm) gives a broad range •Manufacturer’s |
P# MXP100251 LIST:$239.95 MXP:$205.00 TOPEAK®
DIGITAL TORQ WRENCHES • Reversible ratcheting head and box wrench • Precision digital torque wrench with settable torque and over-tighten audible
alarm • Digital read out is programmable
in Nm, kg-cm, in-lb or ft-lb • Includes
battery, tool bits and hard shell storage cover Digital Torq Wrench includes: • 2, 2.5, 3, 4, 5 and 6mm allen wrenches • #2 phillips screwdriver •
Battery, life to 20 hours |
P#MXP100250 LIST:$269.95 MXP:$235.00 TOPEAK® DIGITAL TORQ WRENCHES • Reversible ratcheting head and box wrench • Precision digital torque wrench with settable torque and over-tighten audible alarm • Digital read out is programmable in Nm, kg-cm, in-lb or ft-lb • Includes battery, tool bits and hard shell storage cover Digital Torq Wrench DX includes: • Reversible ratcheting head • Standard 3/8” square driver adapter •3, 4, 5, 6, 8 and 10mm allen wrenches •#2 phillips screwdriver •Torx bit, T25, T30, T40 •Sockets 8, 9, 10, 11, 12, 13, 14, 15mm •Battery, life to 48 hrs. |
||||||||
|
P# MXP150917 $63.00 CHARGEMASTER 365TD • Triple mode, 7 stage charger • Assesses battery connection polarity • Analyzes and diagnoses battery condition • Recovers mildly and/or heavily discharged batteries • Bulk charges batteries quickly • Monitors voltage retention and battery condition • Maintains battery with low current if the voltage drops below a set limit • Extra long cables for ease of use • Secure-grip alligator clips • Weatherproof fuse holder • Permanent connectors with weatherproof cap • 3 charge rates: Motorcycles (600ma), Cars/Boats (3600ma), Boost (For AGM batteries and cold weather charging) • Suitable for AGM batteries that require a higher charge voltage• Especially useful for charging batteries in freezing weather • Backlit LCD display for use in low light conditions • Displays real-time charging rate, including voltage and amperage • Designed to be connected for months or even years at a time (winter storage) • Battery condition monitor indicates if the battery is able to hold a charge or is in need of replacement • Wall bracket and extra long cables for convenient garage use • Suitable for all 12V battery types up to 130Ah including Gel, MF and lead acid |
P# MXP150515 $260.00 YUASA® BATTERY CHARGER • High output changing current (4 amps) • High voltage capable (20 volts) – designed to improve recovery of sulfated batteries • 2 mods:– Fast mode for quick set-up – Normal mode, ideal for smaller batteries, initial activation and deeply discharged batteries • Commercial grade, perfect for dealer shop use • Automatic shut-off • Reverse polarity protection/spark-free operation • Durable construction for longer life • 3-year manufacturer’s warranty |
XTREME CHARGE™
PulseTech’s unique and patented
PULSE technology increases the duty and life cycles of any size or type of 12-volt lead acid battery
from 3 to 5 times! Please do not mistake this for common “pulse Charging”...
Through a unique dual action process, this unique and patented Pulsing technology works in unison with
our patented charge algorithms to not only charge your battery but also removes, and through
regular use, inhibits damaging sulfation crystal growth within your battery. This ensures your battery’s
ability to accept and release as much charge as possible keeping your new batteries in like new condition
while older batteries often improve performance dramatically. All of PulseTech’s
products employ their signature “Pulse Technology” and work with all types and sizes of
12-volt lead acid batteries including flooded, fill and charge, gel, AGM and maintenance free battery
types.
P# MXP150915 $96.00 XTREME CHARGE™ BATTERY MAINTENANCE SYSTEM • Increases battery life by up to 5 times! • Connect it and leave - safely charges and maintains battery indefinitely • Maximum 2.5A charge rate (5.0A effective) • Properly charges all lead-acid batteries: standard, AGM, and Gel types • Microprocessor control constantly evaluates battery and delivers appropriate charge • Exclusive Pulse Technology removes sulfation to extend battery life - even while connected to motorcycle/vehicle • User interface features 12 L.E.D. status indicators • Weatherproof design • High impact plastic housing with rubberized base • 5-year manufacturer’s warranty •Xtreme Charge single station 5-stage charger includes charger with fuse protected quick disconnect battery clamps and lugs
|
P# MXP150512 $69.00 BATTERY CHARGER • Fully automatic 5-stage charge cycle for efficient charging • 6/12-volt
switch • Provides up to 16 volts to enable
recovery of sulfated batteries • Designed to prevent overcharging • Charging and
float mode L.E.D. display • Reverse polarity protection • Accessory leads and fused ring connectors included • 3-year manufacturer’s warranty |
P# MXP150910 $34.95
AUTOMATIC BATTERY CHARGER 900MA • Small, wall mounted charger in plastic case • Micro-processor technology safely maintains and charges batteries • Automatically charges batteries in 3 stages • Safety shut off for reverse polarity and short-circuit protection • Charges all types of powersport batteries • Includes both alligator clips and quick-connect style battery connectors • Input: 120V AC, 60Hz • Output: 12V DC at 900mA • Maximum charge: 14.8V • Maintenance charge: 13.8V • 5-year warranty |
||||||
|
P# MXP158409 MXP:$31.00 MOTION PRO® SPOON-TYPE TIRE IRON SET of 2 • Featuring a 10.5” long handle with curved end to fit hand better •Silver zinc finish |
 P# T1 MXP:$17.95 Flywheel puller RUCKUS / CRF50 / 70
external flywheels 1968 & later, BW80, RIVA50, PW50, RZ350, TT500, XT500, YFM80/100/200/225, YFS200, YFZ350, YSR50, YT125/175 & YZ400F, YZ450F
|
P# MXP530374 MXP:$14.95
RADIATOR FIN STRAIGHTENER • This 6 in 1 tool clears and straightens fins on radiators and oil coolers that have been damaged or clogged with debris • Just select the right
fin spacing and restore the fins to their original
shape and spacing • This tool is also very handy to remove dried mud and dead bugs from all types of bikes, ATVs and UTVs |
P# MXP151507 MXP:$44.00 TIRE AND
TUBE FLAT REPAIR KIT • Covers tubes and tubeless
repair • Comes complete with patches, plugs, plug insertion tool, hole cleaner, glue, pressure wheel with surface preparation tool and knife for plug trimming cylinders and an air valve which can connect directly to the tire valve, or use the flexible air line, also included for hard-to-reach valves |
|||||||
|
MXP#150465 MXP $31.95 MOTION PRO® • Holds clutch hub while nut is
removed
|
MXP#158224 MXP$35.95 MOTION PRO® • Compact design allows for use in tight confines • Comfortable grip • Patented design |
P#
MXP158361 MXP:$14.95 Standard 3/8” drive 250mm P# MXP158363 13.95 Standard 1/4” drive 250mm MOTION PRO® DUAL L-HANDLE DRIVERS • Impact-resistant, ergonomic, molded handle reduces hand fatigue • Use handle drive
to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners • Mini’s are compact 7-5/8”
shaft length for tight access and easy transport •1-piece, chrome-vanadium tool steel shaft •Use with drive sockets,
hex drives, crow’s foot, swivels, etc. •Durable, hard nickel-pewter finish •Lifetime manufacturer’s
warranty |
MXP# 158185 MXP $19.95 MOTION PRO® •
Made of chrome-vanadium tool steel |
|||||||
|
MXP# 150625 MXP$18.95 BikeMaster® • Removable 3/8” head |
MXP# 151640 MXP$159.95 BikeMaster®
• Save money and maybe a critical part! |
MXP# 151537 MXP$15.95 BikeMaster® • Flexible shaft holds shape |
MXP#151578 MXP$27.95 BikeMaster® • Extra long for use with multi
bank carbs, |
|||||||
|
MOTION PRO® DUAL DRIVE MINI T-HANDLES • Use handle drive to tighten/loosen fasteners
and shaft drive for quick installation/removal of fasteners • Compact shaft length for tight access and easy transport • Chrome vanadium tool steel shafts • Use
with drive sockets, hex drives, crow’s foot, swivels, etc. •Durable, hard nickel-pewter finish •Lifetime, manufacturer’s
warranty replacement |
P# MXP158092 MXP:$24.50 MOTION PRO® DEGREE WHEEL • Manufactured
from .052” thick aluminum with a 6-3/4”diameter
and a 6mm center hole camshaft timing |
P# MXP150113 MXP:$21.99 PATTON CHAIN BREAKERS • Heat-treated • For #25-#60 chain • Made in the USA |
|
|||||||
|
MOTION PRO® BALL-END T-HANDLE
SET •
Use T-handle hex to tighten/loosen fasteners and ball-end hex on shaft for quick installation/removal of fasteners • Ball-end
allows for better access to hard-to-reach allen-head bolts (up to 25° working angle) • Compact 6-3/4”
shaft lengths for tight spaces and easy transport •Chrome-vanadium tool steel shaft and T-Handle •Durable hard nickel-pewter finish •Lifetime manufacturer’s
replacement warranty |
MOTION PRO® TRAIL T-HANDLE SET • Compact 1/4” drive folding
T-handle •Set includes T-handle and 8, 10, 12 and 13mm 6-point sockets •Comes with nylon carrying case with internal pockets •Customize with your own 1/4” accessories |
MOTION PRO® TRI-DRIVE MINI T-HANDLE • Use T-handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal
of fasteners • Use with 1/4” drive sockets, hex drives, crow’s foot, swivels, etc. •1/4”
drive has a compact 6” drive shaft length •Compact size for use in tight spaces and is easy to carry •Includes 8mm, 10 mm, 12mm and 13mm sockets •Chrome-vanadium tool steel shaft and T-Handle •Durable nickel-pewter finish •Lifetime
manufacturer’s replacement warranty |
CruzTOOLS® MINISET™ COMPACT METRIC KIT • Precision 48-tooth ratchet with extension and 8-piece socket
set • Contains the most common metric sizes, including hex and phillips bits • Tools are top grade polished
chrome and stored in a durable molded box |
|||||||
|
MOTION PRO® WALL BRACKET FOR T-HANDLE RACK • For mounting the T-Handle Tool Rack (P/N
15-8114) to the side of a toolbox, wall, post or any flat surface • Features a quick-release pin for removing
and attaching the T-Handle Rack •
Includes built-in bottle opener • Made from heavy-duty 12-gauge zinc-plated ste |
MOTION PRO® Ti PROLIGHT WRENCHES™ • Less than 1/4 the weight of a
standard steel wrench • Made of
tool quality titanium alloy • Titanium alloy will never rust or corrode • Patent pending design to optimize strength
and performance • Laser etched markings for easy identification • Ergonomic handle • Recommended for trail and road tool pack use • Not recommended for everyday shop use • Set of 4 (P/N 15-8466) contains 8, 10, 12 and 14mm |
CruzTOOLS® POWER DRIVE™ 1/4” SLIDING
T-DRIVER • Standard 1/4” drive tip •At about 7”, it can be
easily carried on your bike •Sliding
“T” feature •Polished chrome finish |
150129 MXP:$38.00 PLASTIC CLIP ASSORTMENT • 20 of each of the popular plastic clips for both sportbikes and scooters. • Includes: M6 3-stage push rivets M7 3-stage push rivets M7 2-stage pry rivets M8 3-stage push rivets |
|||||||
 M28 X 1.0 R.H. Internal Thread Replaces OEM tool 070MC-HP1A100 Includes M14x1.25 shaft protector cap OEM tool 070MC-HP1A110 For Honda TRX450R 2004 - 2005, CR250R 1978-1980 Kawasaki KLX110 2003-2007, Suzuki DRZ110 2003-2005 Puller body also fits CRF450X 2004-2007 but requires thread protector C08-0257B. For complete Flywheel Puller kit
for the CRF450X 2004-2007 order part 08-0425. |
 |
P# MXP150007
$58.00 BOLT KTM/HUSABERG PRO-PACK • Only aftermarket company to offer hardware in KTM factory style and finish • Includes over 145 pieces of M6 & M8 dimpled flange bolts, concave washers, carb screws, shroud screws, sprocket bolts, Brembo style brake pin clips, and more. Now includes 3 sizes of factory style aluminum bushings, aluminum rim-lock spacers, drain plug washers, sub-frame bolts, M5 dimpled flange bolts and valve stem grommets • Fits all full size late model KTM and Husaberg motocross and offroad motorcycles |
P# MXP150009 $58.00
BOLT SPORTBIKE PRO-PACK • Designed by extensively reviewing the needs of mechanics and riders both at the dealership and the racetrack • Kit is over 250 pieces of premium factory style hardware including socket head bolts, button head bolts, flange bolts, nylon removable rivets, metal locking nuts, fairing bolts, and more • Fits all late model Japanese sportbikes |
|||||||
 |
 |
 |
 |
BOLT™ PRO-PACK • Only aftermarket company to offer hardware in OEM factory style and finish • Riders will fully appreciate this full size kit that is packed with factory style hardware • Includes: rotor bolts, shroud bolts, seat bolts, sub-frame bolts, fork guard bolts, t-nuts, aluminum bushings, aluminum rim-lock spacers, sprocket bolts, fuji nuts, aluminum and copper drain plug washers, valve stem grommets, M5, M6 & M8 hex head bolts, and more (Varies by brand) • Designed for full size models only
HONDA CR/CRF P# MXP150006
KAWASAKI
KX/KXF P# MXP149973
SUZUKI RM/RMZ P# MXP149974
YAMAHA YZ/YZF P# MXP149972
|
P# MXP150008 $58.00
BOLT ATV PRO-PACK • Designed by extensively reviewing the needs of riders and mechanics • Created the most complete ATV fastener kit available • Includes more than 225 pieces of factory size hex flange bolts, button head bolts, fairing bolts, fairing rivets, lug nuts and more • Fits all full size Japanese sport and utility ATVs |
